FMLR-72-P-STL0Z

CHF 11,90 Exkl. 8.1% MwSt.exkl. Versand
Auf Lager
SKU
1693636028.5755
Kategorie
Components
FMLR-72-P-STL0Z kann in einheiten von 1 gekauft werden

LoRa / LoRaWAN module, with antenna pad, SX1272, STM32L0, 192KB internal Flash, no ext. Flash

Auf Lager (938 Stk.)

Miromico - FMLR-72-P-STL0Z

The LoRa® FMLR RF modules enable wireless connectivity to almost all devices, systems and sensors communicating at low datarate over a distance of more than 50km. Power consumption of the underlying nodes can be optimized to run from a small-sized battery, while the integrated wake on radio (WoR) allows the system to operate in a duty-cycled manner. The optionally integrated ARM Cortex-M0 32-bit microcontroller runs the entire RF stack and has sufficient resources available for the integration of additional applications. The system can easily be extended with additional low power sensors on the external carrier board to build out-of-the-box IoT sensor networks.

All FMLR modules are prepared for seamless integration into LoRaWAN®. The LoRaWAN software stack is available as an open source solution and can be run on the integrated microcontroller. The modules are available with additional on-board flash memory to allow Over-the-Air (OTA) update.

In order to provide backward compatible upgrade paths for grown products and systems, the FMLR family supports additional modulation schemes over LoRa. These modulation schemes include (G)FSK, (G)MSK, ASK, and OOK. Highly configurable OTA packet formats enable the communication with standards like Wireless M-bus and IEEE802.15.4g. The modules allow also the emulation of proprietary systems such as Nordic NRF905 or NRF9E5 with enhanced coverage range.

In order to support fast prototyping and development, the proprietary firmware including the wireless stack can be updated via SWD, UART-Bootloader, or OTA.

Key features:

  • Semtech SX1272 based long range LoRaWAN IoT module
  • ARM Cortex M0+ MCU
  • Antenna pad
  • Line-of-sight range up to 100 km
  • Runs customer specifc applications and existing radio stacks
  • Supports frequency range from 860 to 1020 MHz
  • Fully FCC and CE certifed
  • Tiny footprint: 14 x 19.5 mm

Typical applications:

  • Low data rate IoT use cases
  • Telemetry applications
  • Smart city / smart building
  • Tracking and monitoring
  • Smart agriculture
  • Battery powered sensors
  • Low power RF systems
  • Remote data logging
  • Industrial and home automation
  • UART / SPI / I2C wireless bridging (USB optionally available)

Kundenfragen
Keine Fragen
Bitte beachten Sie, dass nur angemeldete Benutzer Fragen stellen können
FMLR-72-P-STL0Z
Weitere Informationen
KategorieComponents
Type of Antenna connectorAntenna pad
Type of productIoT Modules and Sensors
MarkeMiromico
Schreiben Sie eine Bewertung
Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder erstellen Sie ein Konto
Miromico_DevKit_fmlr_stm_SX12xx_CControls
Typ: pdf
Größe: 476.69 kB
Miromico_FMLR_STM_SX1272_Datasheet_CControls
Typ: pdf
Größe: 1.28 MB
Miromico_FMLR-72-x-STL0Z_Datasheet_CControls
Typ: pdf
Größe: 1.75 MB
Miromico_FMLR-72-x-STL0Z-xx_3D_STEP_CControls
Typ: zip
Größe: 1.11 MB
Miromico_FMLR-72-x-STL0Z-xx_Altium_Lib_CControls
Typ: zip
Größe: 25.31 kB