N9010B

KEYSIGHT - N9010B

The N9010B is your first, best choice when you need maximum value in signal analysis up to millimeter-wave frequencies. It helps you find the answer faster, whether you’re seeking tighter design margins or shorter test times.
With the N9010B you can save test time in your spurious response measurements with the fast sweep capability. To optimize mixer levels and maximize achievable dynamic range, the N9010B is available with either a 2 dB/step mechanical attenuator (all frequency bands) or a 1 dB/step electronic attenuator (up to 3.6 GHz).

Key features:
- Frequency Range: 9 kHz .. 3.0, 7.5, 13.6 and 26.5 GHz (up to 1.1 THz with external mixing, see the list of available options in datasheet)
- Analysis Bandwidth: 25 (standard) and 40 MHz
- Displayed Average Noise Level (DANL): -172 dBm at 2 GHz with preamplifier and Noise Floor Extension on
- Third-order Intermodulation (TOI) Distortion: +19 dBm at 2 GHz
- Phase Noise (10 kHz offset): -109 dBc/Hz at 1 GHz; -102 dBc/Hz at 10 GHz
- Amplitude Accuracy: ±0.27 dB
- W-CDMA ACP Dynamic Range: 68 dBc (73 dBc with noise correction on)

Included:
- Spectrum analyzer measurement application
- I/Q Analyzer measurement application
- PowerSuite one-button power measurements
- Dual-core, high performance processor, 8 GB RAM, removable solid-state drive
- Frequency reference
- 25 MHz analysis bandwidth
- Microsoft Windows 10 operating system
- Getting started and troubleshooting guide
- Country-specific power cord