QA42-Q7XSK-2200

SECO - QA42-Q7XSK-2200

The Starter Kit contains:

• Carrier board for Qseven Rev. 2.0 compliant modules CQ7-A42 (DP or HDMI version).
• HD Audio module.
• I2S Audio module.
• One 12 VDC Notebook Power Adapter.
• Cable kit.
• Adapter for mounting a microQ7 module on standard Qseven carrier boards Qseven module not included. Must be purchased separately.

Key features:

• Video Interfaces:
  • LVDS Dual Channel 24-bit + backlight connectors or 2 × eDP connectors;
  • Multimode Display Port or HDMI Connector.
• Mass Storage:
  • 1 × S-ATA connector with HDD Power connector;
  • 1 × mSATA Slot;
  • microSD Slot on combo microSD + SIM connector.
• Networking:
  • Up to 2 x Gigabit Ethernet connectors.
• USB:
  • 1 × USB 3.0 Host port on type-A socket;
  • 2 × USB 2.0 Host ports on double Type-A sockets;
  • 2 × USB 2.0 Host ports on internal pin header;
  • 1 × USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot).
• PCI:
  • miniPCI-e slot Full / Half size, combined with SIM card slot.
• Audio:
  • Audio interface on internal pin header.
• Serial Ports:
  • 4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector;
  • 2 × RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module);
  • CAN interface on PCB terminal block.
• Other Interfaces:
  • SPI internal pin header;
  • LPC Bus internal pin header;
  • SM Bus / I2C GPIO expander, makes available 16 × GPIOs on internal pin header;
  • Front Panel Header;
  • 1 × 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management);
  • +12V Tachometric FAN connector;
  • Optional Debug USB port on miniB socket;
  • Optional MFG connector for JTAG programming of Qseven module.
• Power Supply:
  • +12VDC Mini-fit Standard ATX power connector;
  • Coin cell battery Holder for CMOS and RTC.
• Operating Temperature:
  • −40 – +85 °C (industrial range)
    All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
• Dimensions:
  • 146 × 102 mm (5,75" × 4,02").