2-Quadrant Source / Measure Unit for Functional Test, 20 V, ±1 A or 6 V, ±3 A, 20 W
KEYSIGHT - N6782A
The Keysight N6782A is a source/measure unit (SMU) designed specifically for advanced functional testing of a device. The ability to modulate the output up to 100 kHz along with the capability to source and sink current (2-quadrant operation) makes the N6782A a perfect fit for advanced functional test of a variety of devices such as DC/DC converters, power management units, power amplifiers, and power management ICs. The input stage of the DUT can be stimulated by the fast sourcing and waveform capabilities. While the output stage can be loaded down and measured with the electronic load capabilities, providing a total test solution.
This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB, and LXI compliance are standard. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20−300 W.
Key features
> For use with the N6700 Series mainframes (USB, LAN (LXI-C), GPIB): Low profile MPS or DC Power Analyzer
> DC output ratings: 20 V, ±1 A or 6 V, ±3 A, 20 W
> Voltage accuracy: 0.025 % + 1.8 mV
> Ripple and noise: 12 mV
> Up and down-programming with resistive load typically 20 ms
> Overvoltage, overcurrent, and overtemperature protection
> Modules can operate at lower output power to stay within mainframe rating
> Modules include a quick disconnect connector
Other features and benefits
> Glitch-free sourcing and measurement ― change output and measurement ranges without any glitches
> 2-quadrant operation ― perform as a voltage or current source or as a CV or CC electronic load
> Four current measurement ranges ― precisely capture the current levels of the DUT during different modes of operation
> Excellent transient response ― keep voltage or current stable during high-speed load changes
> Fast modulation of DC ― create waveforms up to 100 kHz to stimulate or load down the DUT
> High-speed digitized measurements ― capture/view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer
Category | Power Supplies |
---|---|
Bipolar | No |
Output Type | DC |
regenerative | No |
Sense | No |
Brand | Keysight Technologies |