Blog

Infiniium Application Software Bundles for EXR/MXR/S-Series Oscilloscopes

Infiniium Application Software Bundles for EXR/MXR/S-Series Oscilloscopes

Application Software Bundles Overview

Save 40% off list price

To simplify configuration and provide a cost-effective solution, Keysight offers seven different subscription-only bundles of oscilloscope software optimized for specific technologies and applications. Select the bundle that meets your needs, choose a subscription duration between 6 to 36 months, and save 40% off the list price relative to purchasing the same subscription items individually. Each bundle is available on Keysight’s Infiniium MXR, EXR, and S-Series oscilloscopes and may be purchased at any time.

Essential Software Bundle

The Essentials Bundle combines all of the essential tools you need to complete everyday tasks — event identification, low-speed serial triggering and decoding, and offline analysis. Keysight’s event identification software, InfiniiScan, includes zone triggering and finders for measurements, serial patterns, and non-monotonic edges, so you can quickly and easily identify waveform anomalies. Our low-speed serial trigger and debug package enables you to debug faster with support of over ten of the most popular low-speed standards. Finally, our Infiniium Offline analysis software makes viewing, analyzing, sharing, and documenting scope measurements possible on your PC, including low-speed serial decoding, so you do not have to physically be near the scope to complete these activities. The Essential bundle includes the following software applications:

Essential_Bundle

Automotive Software Bundle

The harsh environments in which automotive electronics must operate can induce unwanted transients and critical serial bus control errors. You need a tool that is not only reliable and accurate, but a tool that can handle the unique intricacies of automotive applications. Keysight’s EXR, MXR, and S-Series oscilloscopes are specialized measurement tools designed to handle the unique challenges of the automotive industry. These oscilloscopes have higher bandwidth and sample rates that capture fast-changing signals in the high-frequency range of modern vehicles such as those in the battery management system, powertrain, infotainment systems, and other electronic components. They also have specialized software such as serial bus decoding and jitter analysis to help engineers troubleshoot and debug automotive systems.The Automotive bundle includes the following software applications:

Automative_Bundle

Aerospace and Defense Software Bundle

The aerospace and defense industry has some of the highest standards and lowest tolerances for electrical equipment. Engineers in this industry expect electronic devices to be high-quality, durable, and secure since failures or maintenance problems may result in life-or-death situations. Test engineers are expected to validate, characterize, and debug a broad range of electronic equipment with oscilloscopes that meet military standards and requirements. Keysight oscilloscopes meet the latest security and calibration standards required by A&D customers, and also support protocol triggers and decodes specific to military applications. The Aerospace and Defense bundle includes the following software applications:

Aero_Bundle_1

High-Speed Serial Software Bundle

High-speed digital standards are quickly evolving to keep pace with emerging technologies such as 5G, the Internet of Things (IoT), artificial intelligence (AI), virtual reality (VR), and autonomous vehicles. Engineers need to capture clean and accurate high-speed serial waveform characteristics and eye diagrams to optimize the performance of high-speed computing interfaces, data center connections, and consumer electronics. Keysight has software that automates high-speed serial analysis, debugging, and compliance testing that reduces test time and speeds up time to market. The High-Speed Serial bundle includes the following software applications:

High-Speed_Bundle

Signal Integrity Software Bundle

As rise times get shorter, clock frequencies increase, and parallel lines move closer together, signal quality is more susceptible to degradation and interference. The combination of higher bit rates and tightly-spaced lines leads to an increased amount of crosstalk, noise, jitter, loss, and attenuation — all important problems that need a diagnosis. Additionally, power supplies create interference on the data lanes they drive in the form of noise and jitter, and they are susceptible to data-dependent noise such as Simultaneous Switching Noise (SSN), which leads to ground bounce. Keysight’s software enables engineers to troubleshoot signal integrity issues with deep analysis into closed eyes, equalization modeling, crosstalk aggressor identification, and more. The signal integrity bundle includes the following software applications:

Signal_Bundles

Power Software Bundle

The increased functionality, higher density, and higher frequency operation of many modern electronic products have driven the need for lower supply voltages, each of them having tighter tolerances than in previous product generations. Engineers need to zoom in on power rails to look for transients, measure ripple, and analyze coupling.
Ripple, noise, and transients riding on DC supplies are a major source of clock and date jitter in digital systems. Dynamic loading of the DC supply by the processor, memory, or similar features occurs at the clock frequency and can create high-speed transients and noise on the DC supply that can easily have content above 1 GHz. Consider the case of high-speed digital designs such as USB 3.1 with 10 Gbps data rates creating switching transients at 5GHz. Designers need high-bandwidth tools to evaluate and understand high-speed noise and transients on their DC power rails. Keysight’s power-specific software automates measurements and analysis to characterize power supplies and verify power integrity. The power bundle includes the following software applications:

Power_Bundle

Premium Software Bundle

The Premium bundle combines all of the aforementioned bundles into one — your full-service subscription to all relevant oscilloscope software. This option is ideal for engineers that need a variety of different analysis, decode, offline, and pre-compliance testing capabilities at an affordable price, especially those that share equipment between labs. The premium bundle includes the following software applications:

Premium_Bundles

Updates and Enhancements

Each bundle that includes Offline and Compliance packages comes standard with KeysightCare support subscriptions that match the duration of the chosen bundle subscription, which will be visible when quoted. This KeysightCare subscription enables you to receive updates and enhancements to the Offline and Compliance packages over the lifetime of your subscription. Analysis and Decode packages will receive updates and enhancements automatically when new firmware updates are installed. There is no subscription required to receive updates and enhancements to Analysis and Decode packages.

Share

Related Posts

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *