PG912

Pico Technology - PG912

The fast-transition pulse can stimulate a transmission path, device, or network with a broad-spectrum signal in a single instant. These signals, combined with differential capability, are valuable for making high-speed broadband measurements in many fields such as time domain reflectometry, semiconductor testing, gigabit interconnect and port testing, and in radar systems.
High-speed differential data is becoming the dominant measurement challenge in digital, computing, interconnect and telecommunications systems. Despite this need, costeffective, fast-transition differential pulse generators were hard to find until now.
The PicoSource PG900 Series of low-jitter triggered differential USB pulse generators offer a range of advanced features:
• The pulse outputs are optimized for broad spectral content (fastest transition time) to best suit spectral and time-domain transmission and reflectometry measurements
• The internal clock provides stand-alone, self-triggered operation
• Trigger input and output allow the pulse generators to source or respond to system triggers
• Differential outputs ensure that the proliferation of gigabit differential interconnects and systems (such as SATA, USB3, HDMI, Ethernet) can all be addressed
Essential to any differential measurement is the ability to adjust for small but significant velocity and path length differences that are bound to exist in any measurement setup. The PicoSource PG900 pulse generator outputs can each be adjusted (time-skewed) by 1 ns (integrated pulse outputs) or 200 ps (tunnel diode pulse heads) in 1 ps increments to deskew path differences before the measurement, or to deliberately stress a transmission path with timing skew.
Despite their small size and portability, PicoSource pulse generators have plenty of drive capability, with integrated step recovery diode outputs of up to 6 V pk each into 50 Ω. That’s a powerful 12 V pk differential pulse amplitude to drive lossy paths or stress system ports. Outputs are adjustable in 10 mV steps down to 2.5 V pk. An adjustable amplitude limit is provided to protect sensitive devices, and 20 dB attenuators are supplied fitted to the pulse outputs for small-signal optimal match applications.

Key features:
- External 50 Ω N(m) positive and negative tunnel diode pulse heads
- < 40 ps pulse transition time
- Fixed 200 mV output amplitude
- ±500 ps timing deskew in 1 ps steps
- Inter-series N(f)–SMA(m) adaptors included with pulse heads

Integrated pulse outputs:
- Differential outputs with deskew
- 200 ns to 4 μs pulse width
- Adjustable 1 μs to 1 s internal clock period
- Typical 3.0 ps RMS jitter relative to external trigger
- 2.5 V to 6 V amplitude

Tunnel diode pulse heads:
- Differential with deskew
- 40 ps transition time
- 200 mV amplitude

Advanced features:
- Output deskew with 1 ps resolution
- Low-jitter trigger input and output
- Internal trigger clock
- Trigger hold-off

Configuration:
- USB 2.0 connected
- Microsoft Windows compatible

Applications:
- TDR/TDT network and match analysis
- Spectral and flatness measurements
- Timing, jitter, and crosstalk determination
- Semiconductor testing
- Impulse ultra-wideband radars
- Laser diode drivers