MX100QP

CHF 1.695,00 Excl. 7.7% VATexcl. Shipping
In stock
SKU
7007401
Category
Power Supplies

Bench/System multi-range DC power supply, quad output, 4× 35 V, 3 A, 420 W, USB, RS-232, LAN/LXI interface, GPIB (optional)

Delivery time: approx. 3 weeks

TTI - MX100QP

The MX100QP has four independent outputs, each capable of 105 W. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch.

The MX Series represents a new generation of multiple output laboratory power supplies from Aim-TTi. Offering high power within a compact format they use ranged switched mixed-mode regulation with display and control via a backlit graphic LCD and soft keys. Every output has full functionality including fully variable voltage and current, CV / CI operation, individually switched output, and selectable remote sense.

There are three base models MX100T, MX180T and MX100Q. The “T” suffix indicates a “triple” output power supply and the “Q” is a “quad” output. Each is available as a remote programmable version, indicated by a P suffix (e.g., MX100TP). The 100 and 180 refer to the nominal channel power, however, because of power-sharing and range switching, the MX100T and MX100Q are capable of up to 210 W from a single channel, and the MX180 360 W.

Key features
> Four high performance outputs of 105 watts each
> Total power of 420 watts in a highly compact package
> Range switching gives up to 70 volts and up to 6 amps
> Up to 210 watts from a single output (either 35 V, 6 A or 70 V, 3 A)
> Low output noise and ripple via linear final regulation
> High setting resolution of 1 mV and 1 mA
> Variable OVP and OCP trips on all outputs
> 50 setting memories per output +50 linked memories
> Selectable voltage tracking (isolated tracking)
> Selectable current meter averaging
> Switchable remote sense on all outputs
> Graphic LCD provides simultaneous output metering
> Numeric or spin-wheel control of all parameters
> Individual or combined output on / off control with programmable delay sequencing
> Front panel locking with optional pass-code protection
> 3U ¾-rack case for bench or rack mounting
> RS-232, USB, LAN/LXI interfaces
> GPIB (optional)

P models)

Customer Questions
No Questions
Please, mind that only logged in users can submit questions
MX100QP
Additional Information
CategoryPower Supplies
BipolarNo
regenerativeNo
Brandaim TTi
Output TypeDC
Max. Voltage Ch. 1 [V]35
Max. Current Ch. 1 [A]36
Max. Voltage Ch. 2 [V]35
Max. Current Ch. 2 [A]6
Max. Voltage Ch. 3 [V]70
Max. Current Ch. 3 [A]3
Max. Voltage Ch. 4 [V]70
Max. Current Ch. 4 [A]3
Total Max. Power [W]420
Com. InterfaceUSB, LAN (LXI), GPIB, RS-232
SenseYes
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
TTI_MX_MX-P_series_datasheet_CControls
Type: pdf
Size: 9.27 MB