SYS-B08-7/BD

SECO - SBC-B08/BD

The SYS-B08-7 is an Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor. This smart, compact, industrial touch system features a 7” capacitive full-flat multi-touch screen, perfect for IoT. Thanks to the lightweight and easy installation with integrated HW accelerator, this solution is suitable for 24-hr digital signage usage. The SYS-B08-7 low power consumption and fanless system is connectivity-oriented and has Linux ready for quick system deployment. It is ideal for Industrial Automation, Industrial Internet of Things (IIoT), Digital Signage and HMI applications.

Key features

• CPU: NXP i.MX6SX SoloX Processor, Single core Cortex-A9 @1 GHz + Cortex-M4 core @227 MHz
• Max Cores: 1+1
• Memory: Soldered on-board DDR3L memory, 32-bit interface, up to 512 Mb
• Graphics:
  • Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
  • OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
• Video Interfaces:
  • Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
  • 24-bit Parallel RGB Connector
• Video Resolution:
  • LVDS: up to 1366×768 @60 Hz, 24 bpp
  • RGB: up to 1920×1080p @60 Hz, 24 bpp
• Mass Storage:
  • 16 MB NOR Quad-SPI Flash soldered onboard
  • µSD Card slot
• Networking: 1 × Fast Ethernet RJ-45 connectors
• USB:
  • 1 × USB 2.0 OTG port
  • 3 × USB 2.0 Host ports on standard Type-A socket
  • 1 × USB 2.0 Host port on internal pin header
• Audio:
  • I2S Audio interface on programmable pin header
  • S / PDIF interface (In and Out) on programmable pin header
• Serial Ports:
  • 1 × CAN Port reconfigurable as GPIO
  • 2 × RS-232 (Tx/RX signals only) + 1 × RS-485 serial ports on expansion pin header
• Other Interfaces:
  • 2 × I2C dedicated connectors (one reserved for Touch Screen)
  • 6 analog inputs for A/D Conversion
  • Programmable expansion pin header connector, able to offer:
    • CSI interface input (PAL and NTSC formats supported)
    • Up to 20 GPIO
    • SPI interface
    • SPDIF Audio interface
    • I2S Audio interface
    • CAN interface (TTL level)
    • 5 × PWM
    • 3 × I2C
    • 3 × serial ports (2 × RS-232 + 1 × RS-485 interface)
  • Embedded Low Power RTC
  • Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope).
• Power Supply:
  • +12 VDC nominal voltage
  • +3 VDC cabled Coin Cell Battery
• Operating System:
  • Linux
  • Yocto
• Operating Temperature: 0°C ÷ +60 °C (commercial temp.)
• Dimensions: 189.60 × 121.40 × 28.20 mm