SBC-B08-7 Full Version: 7" touch display, NXP i.MX6SX SoloX, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz - 1GB RAM- 8GB eMMC - 2x FastETH - Wi-Fi/BLE - RTC LP - RS-485 - RS-232 - CAN - Comm. Temp. w/ Heatsink
SECO - SBC-B08/FD
The SYS-B08-7 is an Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor. This smart, compact, industrial touch system features a 7” capacitive full-flat multi-touch screen, perfect for IoT. Thanks to the lightweight and easy installation with integrated HW accelerator, this solution is suitable for 24-hr digital signage usage. The SYS-B08-7 low power consumption and fanless system is connectivity-oriented and has Linux ready for quick system deployment. It is ideal for Industrial Automation, Industrial Internet of Things (IIoT), Digital Signage and HMI applications.
Key features
- CPU: NXP i.MX6SX SoloX Processor, Single core Cortex-A9 @1 GHz + Cortex-M4 core @227 MHz
- Max Cores: 1+1
- Memory: Soldered on-board DDR3L memory, 32-bit interface, up to 1 GB
- Graphics:
- Integrated Graphics Vivante GC400T, 2D and 3D HW accelerator
- OpenGL ES 2.0, OpenGL ES 1.1, OpenVG 1.1 supported
- Video Interfaces:
- Single Channel 18-/24- bit LVDS connector + Touch Screen (I2C signals)
- 24-bit Parallel RGB Connector
- Video Resolution:
- LVDS: up to 1366×768 @60 Hz, 24 bpp
- RGB: up to 1920×1080p @60 Hz, 24 bpp
- Mass Storage:
- 16 MB NOR Quad-SPI Flash soldered onboard
- µSD Card slot
- 8GB eMMC soldered onboard
- Networking:
- 2 × Fast Ethernet RJ-45 connector
- WiFi (802.11 b/g/n)
- BT LE combo module + antenna onboard
- USB:
- 1 × USB 2.0 OTG port
- 3 × USB 2.0 Host ports on standard Type-A socket
- 1 × USB 2.0 Host port on internal pin header
- Audio:
- I2S Audio interface on programmable pin header
- S / PDIF interface (In and Out) on programmable pin header
- Serial Ports:
- 1 × CAN Port reconfigurable as GPIO
- 2 × RS-232 (Tx/RX signals only) + 1 × RS-485 serial ports on expansion pin header
- Other Interfaces:
- 2 × I2C dedicated connectors (one reserved for Touch Screen)
- 6 analog inputs for A/D Conversion
- Programmable expansion pin header connector, able to offer
- • CSI interface input (PAL and NTSC formats supported)
- • Up to 20 GPIO
- • SPI interface
- • SPDIF Audio interface
- • I2S Audio interface
- • CAN interface (TTL level)
- • 5 × PWM
- • 3 × I2C
- • 3 × serial ports (2 × RS-232 + 1 × RS-485 interface)
- Embedded Low Power RTC
- Optional 9-Axis Motion Sensors (Accelerometer, Magnetometer and Digital Gyroscope).
- Power Supply:
- +12 VDC nominal voltage
- +3 VDC cabled Coin Cell Battery
- Operating System:
- Linux;
- Yocto.
- Operating Temperature: 0°C ÷ +60°C (Commercial version)
- Dimensions: 189.60 × 121.40 × 28.20 mm
Category | Components |
---|---|
CPU Type | NXP i.MX6 |
Embedded Product Type | HMI Solutions |
ONBOARD WI-FI/BLE | Yes |
Operating Temperature | 0°C ÷ +60°C |
RAM memory | ≤1 GB |
Brand | SECO |