ULINKpro

CHF 1.254,00 Excl. 7.7% VATexcl. Shipping
In stock
SKU
7000182
Category
Software

KEIL ULINKPRO DEBUG & TRACE UNIT

In stock (2 pc.)

ARM Keil - ULINKpro

The ULINKpro debug and trace unit connects your PC's USB port to your target system (via a JTAG, Cortex Debug, or Cortex Debug + ETM connector). It allows you to program, debug, and analyze your applications using its unique streaming trace technology.
ULINKpro, together with MDK, provides extended on-the-fly debug capabilities for Cortex-M devices. High-Speed data and instruction trace are streamed directly to your PC enabling you to analyze detailed program behavior.
ULINKpro connects to a wide variety of processor targets, including ARM7, ARM9, and all Cortex-M processor based devices:
- JTAG support for ARM7, ARM9, and all Cortex-M processors
- Serial Wire Debug (SWD) support for all Cortex-M processors
- Serial Wire Viewer (SWV) support for all Cortex-M processors
- Embedded Trace Macrocell (ETM) support for Cortex-M3, Cortex-M4, and Cortex-M7
Using ULINKpro, you can:
- download programs to your target hardware
- examine memory and registers
- single-step through programs and insert multiple breakpoints
- run programs in real-time
- program Flash memory
ULINKpro offers fast and reliable target connections:
- Data and event trace for Cortex-M up to 100 Mbit/s (Manchester mode)
- Instruction trace for Cortex-M3, Cortex-M4, and Cortex-M7 up to 800 Mbit/s (not supported with ULINKpro D)
- JTAG clock speed up to 50 MHz
- ETM trace: supports Cortex-M devices running at up to 200 MHz (selected devices may have trace-port bandwidth limitations).
- High-speed memory read/write up to 1 MBytes/s
The unique streaming trace capabilities of ULINKpro deliver sophisticated analysis features such as:
- Complete code coverage information about your program's execution ensures thorough application testing and verification
- Performance analysis using the Execution Profiler and Performance Analyzer enable you to identify program bottlenecks, optimize your application, and to isolate problems.
- Streaming instruction trace requires the target device to have ETM (Embedded Trace Macrocell)


Key features:
- The Keil ULINKpro kit includes:
  - One ULINKpro USB-JTAG adapter
  - One USB cable
  - One 20 to 20-pin ribbon cable
  - One 20 to 10-pin ribbon cable
  - One 20-pin 0.05" to 0.1" adapter
  - One ULINK SWD adapater for STM32 development boards
- Wide target voltage range: 1.2V - 3.3V, 5V tolerant
- Support for 5V only devices using a 5V Adapter (optional)
- An isolation adapter (optional) provides electrical isolation from the target system
- USB 2.0 High-Speed connection
- USB powered (no power supply required)
- Target Connectors:
  - 10-pin (0.05") - Cortex Debug Connector
  - 20-pin (0.10") - ARM Standard JTAG Connector
  - 20-pin (0.05") - Cortex Debug + ETM Connector

KEIL ULINKPRO DEBUG & TRACE UNIT
ULINKpro
Additional Information
CategorySoftware
SW_ARM Product TypeHardware Product
License TypeN/A
Minimum Order1
Brandarm KEIL
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
ULINK_family_2017_Flyer
Type: pdf
Size: 409.29 kB