KEYSIGHT DAQ970A Data Acquisition (DAQ) System

Sample More Signals, Faster

KEYSIGHT DAQ970A Data Acquisition (DAQ) System

Keysight DAQ970A OverviewBy 1st of November, Keysight is introducing the DAQ970A Data Acquisition System, successor of the well-known 34970A and 34972A. The next-generation data acquisition (DAQ) system is a mainframe with up to three out of eight updated plug-in modules. Use one of the intuitive interfaces of the DAQ, like: Keysight BenchVue DAQ software, the graphical front panel with task oriented, self-guiding menus, or the integrated web browser.

Key specs at a glance:

  • Advanced 6½ digit internal DMM with improved accuracy and faster measurement speed.
  • Multiple format displays (number, bar, meter, trend chart, and histogram) to easily monitor measurement results.
  • Ability to measure very low current ranges (1 μA DC and 100 μA AC) and higher resistance range (1000 MΩ).
  • Measures and converts 12 different input signals: temperature with thermocouples, RTDs and thermistors; AC/DC volts; 2- and 4-wire resistance; frequency and period; AC/DC current and capacitance.
  • New auto-calibration for compensating internal drifts caused by time and temperature changes.
  • 3497XA programming compatibility.

PLUS

  • All modules have been updated to have improved switching speeds and accuracies.
  • NEW DAQM900A solid state multiplexer with a scan rate speed of up to 450 channels/sec.
  • LAN and USB for easy connectivity to your PC.

What is in the DAQ970A?

Keysight took the benchtop DMM 34465A, striped it down to the measurement engine and built a 3-slot mainframe around it. With its well-known measurement performance, you now have universal inputs with a built-in signal conditioning and all available in a modular, flexible and compact data acquisition package.

Keysight DAQ970A Front

In Detail:

The DAQ970A features 6½ digits (22 bits) of resolution with ultra-low reading noise and a basic DCV accuracy of 0.004%. Used with the new updated modules you can achieve scan rates of up to 450 channels/sec, now you have anything you need to get the job done right the first time.

Acquiring your Data, easy as never before

Access the DAQ970A over a standard web browser. Use the DAQ970A and its built-in Gigabit LAN interface and benefit of a graphical web interface for easy configuration of measurements and monitoring of results.

Run the DAQ970A as standalone system, with the featured built-in USB memory port, and log your data directly on a mounted USB flash drive. Either to extend the internal memory, or copy the data to transfer it to a computer in another location.

Get more information about the DAQ970A in this blog post here or contact us with the form below to get an on-site demonstration.

Aktion
 Boost Your Bench’s Memory – For Free! #6.028
Mehr
Pick Your Probe for Free! Promotion #6.025
Mehr
Keysight - Infiniium S-Series | Promocode: 6.029
Mehr
News
KEYSIGHT DAQ970A Data Acquisition (DAQ) System
Mehr
Keysight Technologies Unveils Infiniium UXR-Series Oscilloscopes with Industry Leading Signal Integrity
Mehr
Join Wave 2018 for Huge Keysight Gear Giveaways
Mehr