QA42-0001-1111-I0-V

SECO - QA42-0001-1111-I0-V

The Qseven Carrier Board CQ7-A42 is a full featured carrier board for Qseven Rel. 2.0 compliant CPU modules, in 3.5" form factor. This carrier board can be used with any Qseven Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven modules. SECOCQ7-3.5 has been developed most of all as a development board to explore the possibilities offered by Qseven modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.

Key feautures

• Video Interfaces:
  • LVDS Dual Channel 24-bit + backlight connectors;
  • DP++.
• Mass Storage:
  • 1 × S-ATA with HDD Power connector;
  • 1 × mSATA Slot;
  • microSD Slot on combo microSD + SIM connector
• Networking:
  • 2 × Gigabit Ethernet connectors.
• USB:
  • 1 × USB 3.0 Host port on Type-A socket;
  • 2 × USB 2.0 Host ports on double Type-A sockets;
  • 2 × USB 2.0 Host ports on internal pin header;
  • 1 × USB 2.0 OTG ports on micro-AB socket (USB Port shared with miniPCI-e slot).
• PCI:
  • miniPCI-e slot Half size, combined with SIM card slot;
• Audio:
  • Audio interface on internal pin header.
• Serial Ports:
  • 4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector;
  • 2 × RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module);
  • CAN interface on PCB terminal block.
• Other Interfaces:
  • SPI internal pin header;
  • LPC Bus internal pin header;
  • SM Bus / I2C GPIO expander, makes available 16 x GPIOs on internal pin header;
  • Front Panel Header;
  • 1 × 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management);
  • +12 V Tachometric FAN connector;
  • Optional Debug USB port on mini-B Socket;
  • Optional MFG connector for JTAG programming of Qseven module;
• Power Supply:
  • +12 V_DC Mini-fit Standard ATX power connector;
  • Coin cell battery Holder for CMOS and RTC.
• Operating Temperature:
  • −40°C ÷ +85°C (industrial range)
    Dimensions:
  • 146 × 102 mm (5,75" × 4,02").