TG1006

AIM TTi - TG1006

The TG1006 uses DDS frequency generation to provide greater accuracy and stability, and to cover a wider frequency range.
DDS (direct digital synthesis) is a technique for generating waveforms digitally using a phase accumulator, a look-up table and a DAC. The accuracy and stability of the resulting waveforms is related to that of the crystal master clock.
When correctly engineered, the DDS generator offers not only exceptional accuracy and stability but also high spectral purity, low phase noise and excellent frequency agility. The TG1006 can generate waveforms between 0.001Hz and 10MHz with a resolution of six digits and a one year accuracy better than 10ppm. Amplitude is variable between 2mV and 20V pk-pk from a source impedance of 50 Ohms or 600 Ohms.

Key features:
- 0.001Hz to 10MHz frequency range using DDS
- 6 digits or 1mHz resolution
- 1ppm stability and <10ppm one year accuracy
- Sine, square and triangle waveforms
- Low distortion, high spectral purity sine waves
- Simultaneous display of frequency and amplitude/offset
- External seven digit 120MHz frequency counter
- Internal full range phase continuous sweep, linear or log
- Unique manual sweep gives quasi-analogue control
- AM and FSK modes, frequency list (10 steps)
- 2mV to 20V pk-pk from 50 or 600 Ohms
- Storage for up to ten frequencies in non-volatile memory
- Low cost