Auf Lager
SKU
1693635995.7383
Kategorie
Components
Cross Platform Starter Kit compatible with both x86 and Arm Rev. 2.0 Qseven modules: a complete package including the basic components necessary to start developing.
SECO - QA42-Q7XSK-2200
The Starter Kit contains:
- Carrier board for Qseven Rev. 2.0 compliant modules CQ7-A42 (DP or HDMI version).
- HD Audio module.
- I2S Audio module.
- One 12 VDC Notebook Power Adapter.
- Cable kit.
- Adapter for mounting a microQ7 module on standard Qseven carrier boards Qseven module not included. Must be purchased separately.
Key features:
- Video Interfaces:
- LVDS Dual Channel 24-bit + backlight connectors or 2 × eDP connectors;
- Multimode Display Port or HDMI Connector.
- Mass Storage:
- 1 × S-ATA connector with HDD Power connector;
- 1 × mSATA Slot;
- microSD Slot on combo microSD + SIM connector.
- Networking:
- Up to 2 x Gigabit Ethernet connectors.
- USB:
- 1 × USB 3.0 Host port on type-A socket;
- 2 × USB 2.0 Host ports on double Type-A sockets;
- 2 × USB 2.0 Host ports on internal pin header;
- 1 × USB 2.0 OTG port on micro-AB socket (USB port shared with miniPCI-e slot).
- PCI:
- miniPCI-e slot Full / Half size, combined with SIM card slot.
- Audio:
- Audio interface on internal pin header.
- Serial Ports:
- 4-wires RS-232 / RS-422 / RS-485 configurable serial port on DB9 male connector;
- 2 × RS-232 Full-modem serial ports on internal header (needs LPC interface from Qseven module);
- CAN interface on PCB terminal block.
- Other Interfaces:
- SPI internal pin header;
- LPC Bus internal pin header;
- SM Bus / I2C GPIO expander, makes available 16 × GPIOs on internal pin header;
- Front Panel Header;
- 1 × 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management);
- +12V Tachometric FAN connector;
- Optional Debug USB port on miniB socket;
- Optional MFG connector for JTAG programming of Qseven module.
- Power Supply:
- +12VDC Mini-fit Standard ATX power connector;
- Coin cell battery Holder for CMOS and RTC.
- Operating Temperature:
- −40 – +85 °C (industrial range)
All carrier board components must remain within the operating temperature at any and all times, including startup; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.
- −40 – +85 °C (industrial range)
- Dimensions:
- 146 × 102 mm (5,75" × 4,02").
Kundenfragen
QA42-Q7XSK-2200
Kategorie | Components |
---|---|
Embedded Product Type | Dev Kits, Carrier Boards and Accessories |
ONBOARD WI-FI/BLE | Nein |
Operating Temperature | 0°C ÷ +60°C |
Marke | SECO |
Schreiben Sie eine Bewertung