QA75-1110-1000-I0

SECO - QA75-1110-1000-I0

The extremely low power and low cost μQseven Rev. 2.0 Compliant Module with the NXP i.MX 6 Processor features all the processor and integrated native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX 6 product family, along with dedicated hardware and software development support.

Main features:

• CPU: i.MX6S Solo - Single core up to 1GHz (NXP i.MX 6 Family, based on ARM® CORTEX-A9 processors)
• Memory: 256 MB DDR3L soldered on-board, 32-bit I/F
• Graphics:
  • Dedicated 2D Hardware accelerator
  • Dedicated 3D Hardware accelerator, supports OpenGL® ES2.0 3D
  • Supports 2 independent displays
• Video Interfaces:
  • 1 x LVDS Dual Channel or 2 x LVDS Single Channel 18 / 24 bit interface
  • HDMI Interface
• Video Resolution:
  • LVDS, resolution up to 1920x1200
  • HDMI, resolution up to 1080p
• Mass Storage:
  • 4 GB eMMC drive on board
  • SD / MMC / SDIO interface
  • Internal SPI Flash for booting
• Networking: Fast Ethernet (10/100) interface
• USB:
  • 1 x USB OTG interface
  • 1 x USB 2.0 Host interface
• PCI: 1 x PCI-e x1 lane (only PCI-e 1.1 and Gen2 are supported)
• Audio: I2S / AC’97 Audio Interface
• Serial Ports: up to 4 x UARTs
• Other Interfaces (on the card edge connector, many pins can be used as General Purpose I / Os or to implement some of the following extra functionalities):
  • Additional SD interface
  • CAN interface
  • Watchdog(s)
  • I2C interfaces
  • PWM outputs
  • SPI interface
  • Additional Audio interface
• Power Supply: +5VDC ± 5%, Low Power RTC on board
• Operating System:
  • Linux (32/64 bit)
  • Yocto
• Operating Temperature: -40°C ÷ +85°C (Industrial temp.)
• Dimensions: 40x70 mm (1.57” x 2.76”)